| Requirement | Details | |-------------|---------| | | Latest version from F-Droid (not Play Store) | | USB Debugging | Enabled in Developer Options | | OEM Unlocking | Enabled in Developer Options | | ADB/Fastboot | Installed on your PC (Termux alone cannot unlock most bootloaders) | | Data Cable | Original/quality USB cable |
: On the target device, go to Settings > About Phone , tap "Build Number" 7 times, then go to Developer Options and toggle on OEM Unlocking and USB Debugging . Step-by-Step Guide
and OEM Unlocking enabled in Developer Options. Step 1: Installing Required Tools in Termux
Go to and tap Build Number 7 times until Developer Options are activated. Navigate to Settings > System > Developer Options . Toggle on USB Debugging . unlock bootloader using termux hot
In Termux, reboot your phone into the bootloader/fastboot mode: adb reboot bootloader Use code with caution.
Open Termux and run the following commands to install the necessary tools:
fastboot devices
It is crucial to understand that . This waiting period applies to any device using a new or unverified Mi account. Even with termux-miunlock , you will likely need to bind your Mi account to the device and wait out the required time before the unlock command will succeed.
Go to Settings > About Phone and tap Build Number 7 times.
To verify the installation was successful, check the version of Fastboot: fastboot --version Use code with caution. Step 4: Establish the Physical Connection Connect the USB OTG adapter to the . | Requirement | Details | |-------------|---------| | |
Read every line before running. A common trick: dd if=/dev/zero of=/dev/block/bootloader – that's a hard brick.
After confirmation, the phone will unlock and wipe all data. It will then restart. fastboot reboot Use code with caution. Troubleshooting & Important Notes
If the modern command returns an error, try the legacy command: fastboot oem unlock Use code with caution. Brand-Specific Variations Navigate to Settings > System > Developer Options