: Download the Odin PC software (v3.10 to v3.14 recommended) and locate your valid twrp-3.0.2-1-sm-t560.tar package. Step-by-Step Installation Guide via Odin Step 1: Boot into Download Mode Power down your Samsung Galaxy Tab E completely.
The instant the screen goes pitch black, quickly shift your fingers to hold simultaneously.
Press and hold the buttons simultaneously. twrp3021smt560tar
Because you disabled Auto Reboot, the tablet will remain stuck on the Download screen. Follow this sequence carefully to initialize TWRP: Disconnect the USB cable.
Connect the tablet to the PC using a stable micro-USB cable. Look at the upper-left section of the Odin window. An box should illuminate in blue or light yellow, registering a random port mapping (e.g., COM4 ), which signifies a secure driver handshake. Step 4: Configure Flashing Settings : Download the Odin PC software (v3
Press the button to confirm entry into Download Mode (characterized by a green Android robot logo). Step 2: Configure Odin on Your PC
If the tablet restarts and TWRP is gone, you didn't uncheck "Auto Reboot" in Odin. Redo the process. Press and hold the buttons simultaneously
: If visible, enable "OEM Unlock" (some T560 models may not have this). Install Drivers : Download and install Samsung USB Drivers on your Windows PC. Flashing with Odin Download Odin : Use a stable version like Boot to Download Mode : Power off the tablet, then hold Power + Home + Volume Down simultaneously. Press when the warning appears. Load the File : Connect to your PC. In Odin, click the button and select the twrp3021smt560tar : In Odin's "Options" tab, ensure Auto Reboot
