Tait Tm8115 Programming Software -

Always save the original file extracted from the radio as a backup before modifying any parameters. Name it clearly (e.g., TM8115_Original_Backup.ptc ). 3. Core Configuration Parameters

The programming cable plugs directly into the microphone jack (RJ45 port) on the front control head of the TM8115. Connect the other end to your PC's USB or serial COM port. 2. Initial Setup and Reading the Radio tait tm8115 programming software

The Tait TM8115 features a clean layout for entering frequency parameters. Navigate to the form in the left-hand navigation tree. Column Field Description Recommended Setting Channel Number The physical memory slot index. 1 through 9 (up to 100 max). Channel Name Text displayed or referenced internally. Alphanumeric descriptions. Receive Frequency The frequency the radio listens to. Entered in MHz (e.g., 155.4000). Transmit Frequency The frequency the radio broadcasts on. Match RX for simplex; alter for repeaters. Network Type Defines the signaling protocol. Set to Conventional . Bandwidth Sets the channel spacing parameters. 12.5 kHz (Narrowband) or 25 kHz (Wideband). Step 4: Configure Signaling and Privacy Codes (CTCSS/DCS) Always save the original file extracted from the

Adding, editing, and rearranging channel frequencies, CTCSS/DCS codes, and power settings. Initial Setup and Reading the Radio The Tait