If you are unsure, download both; Windows will safely ignore the incorrect driver during manual selection. Step 3: Install the USB Driver Follow these steps to run the driver installation package. Disconnect the cutting plotter from your PC. Right-click the downloaded driver installer .exe file. Select . Click Install or Extract and follow the on-screen prompts. Restart your computer once the installer finishes. Step 4: Connect and Verify in Device Manager
Extract the downloaded ZIP file to a known location, such as your desktop. 2. Step-by-Step Installation Guide (Windows 10/11)
The USB cable is too long, damaged, or plugged into an incompatible port. redsail cutting plotter usb driver install
Before you begin, ensure you have the following:
Save the unzipped files to an easily accessible location, like your Desktop. Step 3: Run the Installer Open the extracted folder. If you are unsure, download both; Windows will
Connect your Redsail plotter to the computer using the USB cable and turn the machine power on. Press and select Device Manager .
The driver installation creates a virtual COM port that routes your design software data through the physical USB cable. You must find the specific number assigned to this port. Keep your plotter turned on and plugged into the computer. Open the . Expand the Ports (COM & LPT) category. Right-click the downloaded driver installer
[Device Manager] └── [Ports (COM & LPT)] └── USB Serial Port (COM3) <-- Verify this appears without errors Use code with caution.
Extract the ZIP folder to a recognizable location, such as your Desktop.