Oscam Server Config Better Jun 2026

OSCam (Open Source Conditional Access Module) is a popular open-source server for managing conditional access and subscription-based television services. An OSCam server configuration refers to the setup and tuning of the OSCam software to enable various features such as decoding, encoding, and streaming of television channels.

: The Conditional Access Identification number unique to your encryption provider. Must match your card exactly.

[dvbapi] enabled = 1 au = 1 pmt_mode = 0 request_mode = 1 user = localuser oscam server config

[reader] label = myreader protocol = internal device = /dev/ttyUSB0 caid = 0x0D00 ident = 000000 group = 1 emmcache = 1,128,0 detect = cd mhz = 3570 cardmhz = 3570 } [server] port = 12000 bindto = 0.0.0.0 user = myuser pwd = mypass }

mkdir build && cd build cmake -DWEBIF=1 .. make sudo make install OSCam (Open Source Conditional Access Module) is a

: The central nervous system. It defines global settings, logging, web interface access, and network protocols.

: Maps user access to specific readers. The bedroom_box user can only access readers assigned to group = 1 . Must match your card exactly

If you are using an external USB reader, your configuration will look like this: