The ES99 manages compressor operations such as starting, stopping, and monitoring status. 5.imimg.com Power Requirements : Operates on , 50/60 Hz, with a 250 mA draw.
If the stove regularly fills the pot with unburned pellets during low-power operation, drop parameter Pr06 down in small increments of 0.1 seconds to reduce the fuel delivery volume.
The stove modulates through power levels (P1 to P5) based on the gap between the actual room temperature and the user's setpoint. Micronova Es99 User Manual Pdf
The exhaust fan runs at high speed. The glow plug heats up. Pellet feeding starts at a controlled rate. Stabilization
If you have specific questions about a particular alarm or setting, it’s best to locate the exact for your specific heater model. Micronova Es99 User Manual Pdf - Google Drive Micronova Es99 User Manual Pdf - Google Drive. Google Drive ES99 Electronic Card Operation Manual | PDF - Scribd The ES99 manages compressor operations such as starting,
The manual details several critical monitoring points to ensure compressor health:
Depression error. Usually indicates a blocked flue or an open door. The stove modulates through power levels (P1 to
The stove overheated, tripping the manual reset thermostat.
The control panel features an LCD display and six primary buttons. Standard operations rely on specific button combinations. Increases the target room temperature. Button 2 (Temp -): Decreases the target room temperature. Button 3 (Mode): Accesses the user and technical menus.
| Parameter | Meaning | Typical Range | | :--- | :--- | :--- | | | Set Point (desired temperature/pressure) | Depends on sensor | | HY | Hysteresis (dead band) | 0.1 – 30.0 | | OT | Output ON delay | 0 – 999 seconds | | OF | Output OFF delay | 0 – 999 seconds | | SEn | Sensor type selection | PTC, NTC, PT100, 0-10V | | AL1 | Alarm 1 threshold | As per application |