Features a Morse Taper 3 (MT3) spindle intake with a quill travel of approximately 135mm to 140mm .
Many S68 models feature a manual or "quick" tool ejector, allowing for fast changes of MT3 bits and collet holders.
With more details, I'll be happy to help.
: Gear-driven head, which provides more consistent torque and power compared to belt-driven models. Standard Components :
The gears require constant protection. Check the gearbox sight glass monthly. If the oil appears cloudy or drops below the mid-line marker, drain the oil completely from the lower plug and fill it with high-grade industrial gear oil (typically ISO VG 68 or equivalent non-detergent oil) to protect the internal fiber components from premature degradation. 🛠️ Where to Download the Manual & Find Support
Proper maintenance is the key to longevity for any machine, and the Strands S68 45 is no exception. Regular attention to lubrication, cleaning, and adjustment will keep your drill press operating smoothly for decades to come.
Doing so will launch the internal spring assembly with enough force to penetrate steel paneling. Always wear ANSI-rated impact gloves when resetting the drive mechanism.
Loosen the locknut on the brake adjustment spindle. Rotate the knob counter-clockwise until the brake band fully releases. Re-tighten the locknut.