Poor contact with the SOIC8 clip or loose breadboard connection. Fix: Reduce the SPI frequency in Settings → Speed from 6MHz to 1.5MHz. The new software handles retries better, but slower is safer for in-circuit programming.
Have you updated to the new software? Leave a comment below with your chip detection success stories. Happy flashing!
In this guide, we’ll cover where to find the latest software, how to install it on modern versions of Windows, and tips for troubleshooting common connection issues. Why Use the EZP2013 Programmer?
According to CORIGHT's records, the most recent stable release for the software is version (Released on 2014/12/21) and for the firmware is version 1.2.0.3 . While these release dates might seem old, version 1.2.0.5 remains the standard and is fully functional for supporting the full range of chips available today. It focuses on enhancing system stability and fixing known bugs. To ensure a malware-free installation, always prioritize the official CORIGHT website over unknown third-party download portals. ezp2013 programmer software download new
Handles standard 5.0V chips as well as lower voltage 3.3V EEPROM/Flash chips safely.
The EZP2013 generally uses libusb or generic drivers. On Windows, it may sometimes be detected as "EP01". If the auto-installation fails, you might need to manually point the driver wizard to the Drivers folder inside your software directory. The driver files are generally compatible with Windows 2000, XP, Vista, 7, 8, and 10.
While the official "new" EZP2013 software is excellent for beginners, advanced users often switch to or NeoProgrammer . These are free, open-source tools that work with the same hardware. Poor contact with the SOIC8 clip or loose
It uses a high-speed USB interface that is significantly faster than the older EZP2010 model.
Place your chip into the ZIF socket or an appropriate adapter board (e.g., SOP8 to DIP8). Ensure that Pin 1 aligns correctly with the indicator mark on the programmer.
| Updated for 2025-2026
Create a of old chip data before executing a write sequence.
Open , find the "Unknown Device," right-click it, and select Update Driver .
EZP2013 Programmer Software Download: The Complete Guide to New Versions and Setup Have you updated to the new software