For library support, many users utilize the SmartRC-CC1101-Driver-Lib on GitHub. If you'd like, I can help you with:
Recheck the CSN, SCK, MOSI, and MISO connections. Many users swap MOSI and MISO.
The E07-M1101D is a high-performance, low-cost wireless transceiver module developed by Chengdu Ebyte Electronic Technology . Based on the Texas Instruments CC1101 chip, it is a staple in the DIY electronics community for short-range radio communication in the 433MHz ISM band. Understanding the is the first step for any hobbyist or engineer looking to integrate this module into a project. E07-M1101D Pinout and Interface e07-m1101d pinout
Standard SPI interface for communication.
: Connect to the hardware SPI Clock (D13 on Arduino Uno). E07-M1101D Pinout and Interface Standard SPI interface for
Whether you are building a smart home sensor network or experimenting with RF remote controls, the E07-M1101D and its clear pinout will serve as a reliable foundation. Keep the above tables and tips handy, and you will be set up for success.
Some integrations, like the "ESPSomfy-RTS" project, use a different mapping. A working alternative for an ESP32 Dev Kit is: GDO0→GPIO 4, CSN→GPIO 13, SCK→GPIO 14, MOSI→GPIO 15, MISO→GPIO 16, GDO2→GPIO 36. like the "ESPSomfy-RTS" project
2-FSK, 4-FSK, GFSK, MSK, ASK, and OOK. Microcontroller Interfacing Guides
The ESP8266 also operates at 3.3V, making it a great choice. According to tests on the NodeMCU board, the following connections work reliably:
pin header). Depending on the specific variant (such as the E07-M1101D-TH or E07-M1101D-SMA ), the physical layout is optimized for breadboard or prototype PCB mounting.
The E07-M1101D's capabilities are summarized in the tables below: