button once to enter program mode (you will see "P1" or "1 ON"). to select the program number (P1–P10) and press Set "ON" Time
The button allows you to override the program temporarily. ON: The timer is permanently on. AUTO: The timer follows your scheduled programs. OFF: The timer is permanently off. Note: Program OFF has priority over Program ON. 6. Additional Functions 6.1 Random Function (Security) To deter burglars, activate the random function. Press RANDOM . The display will show "RND".
This article acts as a comprehensive, easy-to-follow guide to the Chevron Digital Timer EW-32 Go to product viewer dialog for this item. chevron digital timer ew-32 user manual
The random feature turns your connected lights on and off at irregular intervals. This mimics a lived-in look while you are away from home on vacation.
: Press the PROG (or Timer) button once. You will see " 1 ON " on the display. button once to enter program mode (you will
: While holding CLOCK , press the HOUR button to reach the current hour. Pay close attention to the AM/PM indicators on the screen.
The Chevron EW-32 allows you to set multiple unique On/Off event pairs. You can apply these programs to single days, weekdays, weekends, or the entire week. Step-by-Step Programming AUTO: The timer follows your scheduled programs
buttons to choose a program number (e.g., P1) and confirm with Set "ON" Time
The timer operates on a real-time clock. It must be set accurately for your scheduled programs to trigger on time. Setting the Day and Time Press and down continuously.
Use the "+" (Plus) or "-" (Minus) buttons to cycle through and select the current: Day of the week (e.g., MO, TU, WE). Hour (confirm with "SET" after adjusting). Minutes .
: Before the first use or if the screen is blank, plug the timer into a wall outlet for at least to charge the internal memory backup battery. : Use a pin or paperclip to press the button to clear any old settings and start fresh. Setting the Current Time Press and hold the button for 3 seconds until the display begins to flash. buttons to adjust the to confirm each selection and finish the clock setup. Programming On/Off Cycles The EW-32 typically supports up to 10 unique on/off programs