Manual Verified | Castrol Lubecon Advanced System Controller

Once programmed, the system must be purged to remove air from the capillary tubes. Put the controller in an "on cycle" and ensure the proximity switch detects the chain. This forces the central pump to prime the lines. Common Troubleshooting and Maintenance

1. Overview of the Castrol LubeCon Advanced System Controller

Set the duration of the lube pulse, measured in milliseconds. This determines the volume of lubricant deposited on each pin. Too short causes starvation; too long causes dripping.

Drill conduit entries only through the bottom of the enclosure to prevent water ingress.

A manual is most effective when designed for quick use on the plant floor:

Proximity sensor misaligned or faulty; excessive sensor gap.

Check main circuit breaker. Replace internal board fuses with exact matching ratings.