Actia Psa Xs Evolution Drivers Repack Verified 'link'

We tested three Actia PSA XS Evolution clones on a Peugeot 308 (2016) with DiagBox 9.85:

Before diving into drivers, let’s clarify the hardware. The Actia PSA XS Evolution is a VCI (Vehicle Communication Interface) that replaces the older Pass-Thru (XSi) models. It allows a laptop to communicate via CAN, K-Line, and Diagnostic over IP (DoIP) with vehicles manufactured from 1995 to 2025.

Step 2: Disable Driver Signature Enforcement (If using Windows 10/11 x64) actia psa xs evolution drivers repack verified

Connect the other end to a vehicle's OBD2 port to power the unit (the green LED should blink, then stay solid or turn off depending on your firmware version).

: These tools are notoriously picky and generally perform most reliably on Windows 7 (32-bit) We tested three Actia PSA XS Evolution clones

: These drivers are verified for Windows 8, 10, and 11 (both x86 and amd64 architectures). Installation Strategy (Verified Repack Method) Community "repacks" often bundle the driver with the PSA VCI Driver

Plug the Actia PSA XS Evolution interface directly into a native USB port on your laptop (avoid using unpowered USB hubs). Step 2: Disable Driver Signature Enforcement (If using

: Clones often have a blue 15-pin USB connector, while originals are black. Clones may also fail to communicate with newer CAN-bus modules like ABS or BSI if they use "cut-down" hardware. Driver Types

Use a dedicated cheap laptop with Windows 10 LTSC. Never use your daily driver for diagnostics.

Plug your ACTIA PSA XS Evolution interface into a (USB 3.0 ports can sometimes cause timing issues with older clone hardware).